Cooler Arctic Liquid Freezer III 420 ARGB

Ready Out-Of-the-Box - Easy Installation The Liquid Freezer III A-RGB is ready to use right out of the box thanks to the pre-installed fans in a push-fit configuration. The fan cables are integrated into the tube housing, so only one cable needs to be connected to the motherboard. With the MX-6 Thermal Paste included in the delivery, you have everything you need for a quick and easy installation. Future-proof Compatibility The Liquid Freezer III A-RGB is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors in the LGA1851 socket in the future. ARCTIC customers don't need to worry that the new processors will require new coolers. We guarantee full compatibility. All Liquid Freezer IIIs can be used with Intel's new LGA1851 socket without restriction. Quiet and powerful VRM fan Motherboards' voltage converters often operate at their maximum temperature in combination with power-hungry CPUs. To compensate for the lack of airflow from a tower cooler, Liquid Freezer III operates with a revised VRM fan. The 60 mm fan with PWM control allows for near-silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This allows for a consistently higher load and longer service life for the voltage converters. Contact frame for Intel LGA1700 and LGA1851 Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure on the board, the cell and the solder layer between the cell and the IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The patented mounting frame from ARCTIC does not deform the CPU, massively reduces the mechanical load on the CPU, is quick and easy to install and allows the cooler to be screwed onto the CPU backplate. As a result, mechanical stress on the motherboard and CPU is minimized, cooling performance remains consistent, and installation is quick and simple. Optimized, in-house developed water pump The Liquid Freezer III is equipped with a specially developed PWM-controlled water pump, which has been further optimized in terms of both performance and noise. Thanks to the improved heatsink with extended fin area and optimized water pipes, the Liquid Freezer III A-RGB increases its performance while maintaining its silent operation. Full control or simple control Two connection cables - two control options: Separate control: Using the split cable with three separate connections, the pump, VRM fan and radiator fan can be controlled independently of each other. This allows, for example, the control of the VRM fan speed independently of the CPU and the proportional regulation of the temperature of the voltage converters via PWM. All-in-One: Like the Liquid Freezer II, this allows the control of the entire unit via a single connection, with which the speed of the cooler fans is output. Therefore, the pump, VRM and cooler fans can be easily controlled via a single PWM setting. Native AMD Offset Mounting For several generations, AMD has been using a multi-chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot in these processors is not centrally located under the IHS (Integrated Heat Spreader), but is slightly offset. Therefore, AMD's mounting solution has a 5mm offset to achieve optimal heat dissipation. Air Purification System Efficient smoke extraction in confined spaces, effectively filtering smoke and dust. Combined with optional air purifiers, safe and worry-free. Improved Radiator Design The cooling surface of the 38mm thick radiator has been expanded by 23% by increasing the fin stack. This allows not only improved heat dissipation, but also a larger liquid volume. As a result, heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed for a longer period of time. High Static Pressure ARCTIC relies on the well-proven P A-RGB fans, which have already received numerous awards for their outstanding performance. The P A-RGB series is particularly suitable for use in heatsinks and coolers with a high fin density. Thanks to their high static pressure, they achieve significantly better results compared to fans designed for high air circulation. Limited Compatibility with Some Motherboards Some motherboards are not compatible with the Liquid Freezer III A-RGB due to the oversized SSD coolers in the M.2_1 slot. We are providing a suitable M.2 cooler for the affected motherboards free of charge. Quality you can rely on To ensure the longevity of our products, we conduct long-term tests under different, sometimes very harsh conditions. This way we learn how we can continuously improve our products for our customers. In addition, the excellent results of long-term tests give us the confidence that our products are not only excellent in terms of quality, but also in terms of durability. We gladly pass this certainty on to our customers, which is why we provide a 6-year manufacturer's warranty.  

• Compatibility:
  • Intel:1700
  • AMD: AM5, AM4
• PI | NNPI: 319 | 259
• TIM: MX-6 (0.8 g)
• Warranty:6 Years
• Operating Ambient Temperature: 0—40 °C
• Weight: 2325 g
• All-In-One Connector:4-Pin PWM Connector
• Splitt Connector:3x 4-Pin PWM Connector
• Pump: 800—2800 rpm (PWM controlled)
• Current | Voltage: 0.35 A | 12 V DC
• Cold Plate:Copper, Micro Skived Fins
• Tube Length:450 mm
• Tube Diameter:
  • Outer: 12.4 mm
  • Inner: 6.0 mm
• Radiator
  • Material: Aluminum
  • Dimensions: 317 (L) x 138 (W) x 38 (H) mm